Flooring

Tile Calculator

Calculate tile quantity for one or more rectangular areas using user-entered tile length and width plus an adjustable waste allowance.

Last reviewed: November 11, 2026

Project measurements

Measurement system

Enter tile face dimensions. Package sizes and grout-joint coverage are not assumed.

Tile area 1

How to use this calculator

  1. Enter every rectangular project area.
  2. Enter the individual tile face length and width.
  3. Choose a waste allowance for the layout.
  4. Calculate the exact, adjusted, and whole tile quantities.

How the calculation works

Combined project area is divided by one tile’s face area. Waste is applied to the unrounded quantity, and the final purchase result is rounded upward to a whole tile.

Formula

Tile area = tile length × tile width
Exact tiles = project area ÷ tile area
Purchase tiles = exact tiles × (1 + waste % ÷ 100), rounded up

Worked example

A 100 square foot area using 12 in × 12 in tiles needs 100 tiles before waste. With 10% waste, the purchase quantity is 110 whole tiles.

Tile count per 100 square feet

Tile count is area divided by one tile, so small tiles multiply the count quickly.

Tile sizeTiles per 100 sq ft
4 x 4 in900
6 x 6 in400
12 x 12 in100
12 x 24 in50
24 x 24 in25

A second example: a bathroom floor

An 8 ft by 10 ft floor is 80 square feet. With 12 x 24 in tiles (2 square feet each) that is 40 tiles. A 15% allowance for a diagonal or complex layout gives 46 tiles. If tiles come 8 to a box, that is 5.75, so 6 boxes, or 48 tiles.

Grout lines

This calculator uses tile face size and does not add the grout line. For small tiles, a wide grout line changes the real coverage; some people enter the tile plus the joint as the dimension. The result is an estimate to check against the product data.

Common mistakes

  • Entering the carton size as the tile size.
  • Entering inches and feet in the same field.
  • Not buying a few extra tiles for future repairs. Tile lots can differ in color.

Checking the layout before you buy

A tile count assumes the tiles can be cut and reused efficiently. In a real room, the number of full tiles depends on where you start. A room 10 ft wide with 12 inch tiles fits ten full tiles across, but a room 10 ft 6 in wide ends with a 6 inch strip at one wall, or a 3 inch strip at each wall if the layout is centered.

Draw the room to scale and place the tiles on paper from the center or from the most visible wall. Cut tiles at the edges should be at least a half tile wide where possible, which may mean shifting the starting line. Count full tiles and cut tiles separately and compare the total with the calculator before you order.

Rounding and returns

Tile boxes are usually sold in whole boxes, so the practical order is always a multiple of the box count. If the result falls just above a whole box, consider whether the extra box is the spare you wanted anyway. Ask the store about their return policy for unopened boxes before you buy, because policies vary and cut or special-order tile is often handled differently.

Project considerations

  • Enter the actual tile face dimensions for the selected product.
  • Package size is not assumed; convert the whole-tile result using the product packaging.
  • Grout joints, patterns, borders, cuts, and breakage can affect actual quantity.

Frequently asked questions

Does this assume tiles per box?

No. Packaging varies, so the result is a whole-tile quantity rather than a box count.

Are grout joints included?

No. The first version uses tile face area directly and states that assumption rather than applying a universal joint width.