Landscaping

Mulch Calculator

Estimate mulch for multiple rectangular garden beds using US customary or metric measurements and common bag sizes.

Last reviewed: November 11, 2026

Project measurements

Measurement system

Bed 1

How to use this calculator

  1. Choose US customary or metric measurements.
  2. Enter a garden bed’s length, width, and desired mulch depth.
  3. Add each separate bed.
  4. Calculate volume and compare bulk and bag results.

How the calculation works

The calculator multiplies length, width, and depth for each rectangular bed, then combines the volumes. It converts the result to cubic yards, cubic feet, and cubic meters and rounds bag counts up.

Formula

Bed volume = length × width × depth
Cubic yards = cubic feet ÷ 27
Bags = cubic feet ÷ bag volume, rounded up

Worked example

A 12 ft × 6 ft bed covered 3 in deep needs 18 cubic feet, or about 0.67 cubic yards. That equals nine 2-cubic-foot bags or six 3-cubic-foot bags.

How far a cubic yard goes

Mulch coverage depends only on depth. The table shows the area covered at three common depths and the area covered by a single bag.

DepthSq ft per cubic yardSq ft per 2 cu ft bagSq ft per 3 cu ft bag
2 in1621218
3 in108812
4 in8169

A second example with three beds

A 20 ft by 4 ft border, a 10 ft by 3 ft bed, and a 6 ft by 6 ft bed total 146 square feet. At 2 in deep that is 24.33 cubic feet, or 0.90 cubic yards. In 2 cubic foot bags that is 12.17, so 13 bags; in 3 cubic foot bags it is 8.11, so 9 bags.

If you are only topping up existing mulch by 1 inch, the same beds need 12.17 cubic feet, about 0.45 cubic yards. Measure the depth you actually have before deciding how much to add.

Bulk or bagged

Bagged mulch is convenient for small beds and exact quantities. Around a cubic yard, which is 13.5 bags of 2 cubic feet, many people start comparing it with bulk delivery. The comparison depends on local prices and delivery fees, which this tool cannot know.

Common mistakes

  • Measuring the whole yard instead of only the planted area.
  • Using the bag size from memory. Check the cubic feet printed on the label.
  • Forgetting that a cubic yard is 27 cubic feet, not 27 bags.

Estimating without a calculator

A quick check uses the coverage table above. A cubic yard covers 108 square feet at 3 inches, so a 216 square foot bed at that depth needs 2 cubic yards. Halve the depth and the same cubic yard covers twice the area.

Because mulch is bulky, the amount you order is usually decided by what the truck or bags can carry. Compare the result with the bag volume printed on the label rather than assuming 2 cubic feet, and keep the depth consistent across beds so the numbers add up the way the calculator assumes.

Common mistakes

  • Measuring the whole garden instead of only the beds that will be mulched.
  • Applying a new layer on top of an old one that is already deep.
  • Ordering by bag count without checking the volume printed on the bag.
  • Forgetting that two beds at different depths need separate entries.

Project considerations

  • Measure only the area to be covered.
  • Existing mulch and settlement can change the needed depth.
  • Bag volumes are nominal; check the label.

Frequently asked questions

How many bags equal one cubic yard?

A cubic yard is 27 cubic feet, so it equals 13.5 two-cubic-foot bags or nine three-cubic-foot bags. Whole-bag purchases should be rounded up.

Does the calculator add extra mulch?

No. It calculates the entered dimensions only. Increase the depth or quantity separately if conditions warrant an allowance.