How to use this calculator
- Select the measurement system.
- Measure each lawn, bed, or raised area.
- Enter the planned soil depth for each area.
- Add waste if appropriate and calculate the combined topsoil volume.
How the calculation works
Each entered area is treated as a rectangular prism. Volumes are combined before the optional waste percentage is added.
Formula
Area volume = length × width × depth Total with waste = combined volume × (1 + waste % ÷ 100)
Worked example
A 12 ft × 8 ft bed filled 4 in deep contains 32 cubic feet. With 5% waste, the planning total is 33.6 cubic feet, or about 1.24 cubic yards.
Coverage by depth
Because a cubic yard is 27 cubic feet, the area it covers depends only on depth.
| Depth | Sq ft covered by 1 cubic yard |
|---|---|
| 1 in | 324 |
| 2 in | 162 |
| 3 in | 108 |
| 4 in | 81 |
| 6 in | 54 |
A second example: a raised bed
A 4 ft by 8 ft bed filled 10 in deep needs 26.67 cubic feet. With 5% waste it is 28 cubic feet, or 1.04 cubic yards.
Settling and delivery
Fresh soil settles as it is watered and walked on. If you need a finished depth, order a bit more than the calculated volume and finish with a rake. Large deliveries are quoted in cubic yards, so keep the unit consistent.
Common mistakes
- Confusing the depth of topsoil you are spreading with the depth of the bed.
- Using inches as feet.
- Forgetting that filling a raised bed to the top may include a lower layer of other material.
Choosing a depth
The right depth depends on what you are doing. Filling a raised bed is a matter of the height of the frame. Spreading a thin layer to repair a lawn is a different job from building up a planting bed or leveling a low area, and each uses a very different amount of soil. The coverage table above shows how quickly the volume changes: a layer 6 inches deep needs six times the soil of a layer 1 inch deep.
Because of this, measure the area and decide the depth before ordering. If you have existing soil, dig a test hole to see what depth you already have, and calculate only the added layer. Extension services and garden centers can advise on depth and soil type for your plants. The calculator turns your chosen depth into volume.
Bags and bulk
Topsoil is sold in bags for small jobs and by the cubic yard for larger ones. A cubic yard is 27 cubic feet, so a bag labeled 1 cubic foot would take 27 bags to make one cubic yard. Compare the price per cubic foot of each option and the delivery cost for bulk before deciding.
Common mistakes
- Entering a bed’s height as its depth when the bed will not be filled to the top.
- Mixing inches and feet in the same section.
- Ordering topsoil for an area where the existing soil is already deep enough.
- Forgetting that the order should be rounded to the quantity your supplier sells.
Project considerations
- Settling and compaction depend on soil composition and site conditions.
- No universal soil density or weight is assumed.
- Existing grades and irregular shapes may require field adjustment.
Frequently asked questions
How is this different from Soil Volume?
Topsoil Calculator supports multiple topsoil project areas and optional waste. Soil Volume is a material-neutral geometry tool that also supports circular spaces.
Does this estimate soil weight?
No. Soil density and moisture vary too much for a universal weight conversion.