Painting

Paint Calculator

Estimate gallons or liters of paint for multiple walls. Adjust coats, coverage, and opening sizes to match the product and project.

Last reviewed: November 11, 2026

Project measurements

Measurement system

Wall 1

Uses 20 sq ft (1.86 m²) each.
Uses 15 sq ft (1.39 m²) each.
Check the paint label; actual coverage varies.

How to use this calculator

  1. Choose US customary or metric measurements.
  2. Enter each wall’s length and height.
  3. Enter door and window counts, coats, and the coverage from the paint label.
  4. Calculate and round purchasing quantities based on available container sizes.

How the calculation works

Paint quantity is area times coats divided by coverage. The calculator totals the wall area, subtracts 20 square feet for each door and 15 for each window, and divides the remaining paintable area by the coverage rate you enter. Everything depends on the coverage figure, so replace the default with the number from the can you plan to buy.

Formula

Paintable area = total wall area − door area − window area
Paint = paintable area × coats ÷ coverage rate

Worked example

A bedroom is 14 ft by 12 ft with 9 ft walls. The wall area is 52 ft x 9 ft = 468 square feet. One door (20) and two windows (30) leave 418 square feet. Two coats at 400 square feet per gallon need 2.09 gallons. That is two gallons plus one quarter, 2.25 gallons, rather than three full gallons.

Gallons by wall area

The table applies the paint formula to net wall area, after doors and windows are subtracted. It shows how much the coverage figure and the number of coats move the answer.

Net wall area1 coat at 3502 coats at 3502 coats at 400
300 sq ft0.86 gal1.71 gal1.50 gal
400 sq ft1.14 gal2.29 gal2.00 gal
500 sq ft1.43 gal2.86 gal2.50 gal
600 sq ft1.71 gal3.43 gal3.00 gal

Reading the label

Manufacturers state a typical coverage per gallon, and Sherwin-Williams, for example, describes about 350 to 400 square feet for a gallon while advising to keep a little extra on hand for textured walls. The default on this page is the low end of that range. Rough surfaces, dark colors over light, and fresh drywall all tend to use more paint, which is why a primer coat is often planned separately.

Buying in practical sizes

A quart is 0.25 gallon. When the answer is 2.09 gallons you can buy two gallons and a quart. Tinted paint may not be returnable depending on store policy, and batches can differ slightly, so it is usually safer to buy the full amount at once and keep the leftover for touch-ups.

Older homes

If you are disturbing paint in a home built before 1978, lead may be present. The EPA's Renovation, Repair and Painting rule applies to paid contractors in such homes, and the EPA states that homeowners working on their own homes are generally exempt. Read the EPA page listed below before sanding or scraping.

Project considerations

  • Coverage varies with surface texture, color change, application method, and product.
  • Use the manufacturer’s coverage rate instead of relying on the default.
  • Trim, ceilings, repairs, and primer are not included.

Frequently asked questions

Why is the default 350 square feet per gallon?

It is a planning assumption, not a guarantee. Replace it with the coverage shown on the paint you plan to use.

Should I subtract doors and windows?

For a closer wall estimate, yes. This tool uses 20 square feet per door and 15 square feet per window; unusual openings may need a separate area calculation.

References

Published sources for context. They are not used in the calculation.