Concrete & Masonry guide

How Many Bricks Do I Need for a Wall?

Use the brick-and-joint module to count bricks from wall area, subtract openings, and understand how joint width and wall thickness change the total.

Last reviewed: November 11, 2026

The short answer

A brick wall is a repeating pattern of one brick plus one mortar joint. Divide the wall area by the area of that module to count bricks, add an allowance for cuts and breakage, and double the count if the wall is two bricks thick.

Use the Brick Calculator

The brick-and-joint module

Every course in a wall has the same rhythm: a brick, then a mortar joint, then another brick. Vertically the same is true, with a brick height and a joint between courses. When you add the joint to each dimension you get a module, and the wall is simply that module repeated. This is why the joint thickness is as important as the brick size.

Take a brick with a face 7.625 inches long and 2.25 inches high, with a 0.375 inch joint. The module is 8 inches by 2.625 inches, or 21 square inches. A square foot is 144 square inches, so a square foot of wall takes 144 ÷ 21 = 6.857 bricks, and 100 square feet takes about 686.

Brick count formulas

Net wall area = length × height − openings
Module area = (brick length + joint) × (brick height + joint)
Bricks = net area (in²) ÷ module area (in²)
Purchase = bricks × (1 + allowance % ÷ 100), rounded up

Convert the wall area to square inches by multiplying square feet by 144, or convert the module to square feet by dividing by 144.

Worked example: a garden wall with a gate opening

A garden wall is 24 ft long and 3 ft high, with a 3 ft wide opening for a gate that is the full 3 ft height. The brick face is 7.625 inches by 2.25 inches, with a 0.375 inch joint. The allowance is 10%.

  1. Gross area: 24 × 3 = 72 ft²
  2. Opening: 3 × 3 = 9 ft²
  3. Net area: 63 ft² = 9,072 in²
  4. Module: 8 × 2.625 = 21 in²
  5. Bricks: 9,072 ÷ 21 = 432
  6. With 10%: 432 × 1.10 = 475.2, so 476 bricks

Result: You would order 476 bricks for a single-thickness wall. If it were two bricks thick, the face count would be about doubled, to roughly 952.

How the joint changes the count

The same brick on 100 square feet needs 731 bricks with a 1/4 inch joint, 686 with a 3/8 inch joint, and 645 with a 1/2 inch joint. A wider joint means fewer bricks and more mortar. The joint is chosen from the design and the brick, and it should be consistent, so use the figure in your plan.

Brick sizes differ by product. A brick with a 7.625 by 2.625 inch face and a 3/8 inch joint has a 24 square inch module, giving 600 bricks per 100 square feet, which is about 12.5% fewer than the first example. Always enter the face size from the manufacturer’s data sheet.

Openings, corners, and cuts

Openings reduce the count, but not by exactly their area, because the bricks beside and above an opening must be cut or laid to fit. Corners, ends, and tops of walls also need cut pieces. A wall with many windows and corners is more wasteful than a long plain wall, so the allowance should reflect that.

Rowlock courses, soldier courses, and other decorative patterns use bricks in different orientations. They are better calculated as separate sections with their own module.

Common mistakes

Counting only one face when the wall is two bricks thick
The calculator counts the face. A double-thickness wall needs about twice as many.
Using nominal sizes
A brick called 8 inches long may actually be 7.625 inches before the joint is added. Use actual sizes.
Forgetting the footing
Foundations and footings are separate material takeoffs.
Ordering to the exact count
Bricks break, and a later order may not match in color. Buy all you need from one lot.

A hand check using bricks per square foot

You can estimate quickly by remembering that a brick with a 7.625 by 2.25 inch face and a 3/8 inch joint takes about 6.86 bricks per square foot. A wall of 63 square feet needs 63 × 6.86 = 432 bricks, which agrees with the worked example. Multiply by the allowance to get the order.

If your brick is a different size, calculate its own figure by dividing 144 by the module area in square inches, and use that in place of 6.86. This check does not replace the calculation, but it catches a wrong dimension or unit before you order.

Planning a straight, level wall

Counting bricks is only part of planning a wall. The course height sets how many courses fit between the foundation and the top. With the 2.625 inch module, a 3 ft wall (36 inches) holds 13.7 courses, which is not a whole number, so the wall would end with a partial course. Choosing a wall height of 13 or 14 courses gives a clean finish.

Thirteen courses are 34.1 inches tall and 14 courses are 36.75 inches. Plan the height from the course count and use that height in the calculator for the most accurate result.

Brick questions

Does the calculator include mortar?

No. It counts bricks. Mortar quantity depends on the joint size, the mix, and how the wall is built.

Is this accurate for veneer?

It counts the face of the wall, which is what veneer is. Ties, flashing, and weep holes are separate items.