Landscaping

French Drain Calculator

Calculate the stone volume for a French drain trench from its length, width, and depth, subtracting the volume of the pipe laid in it, with an adjustable waste allowance.

Last reviewed: November 11, 2026

Project measurements

Measurement system

This calculator reports stone volume only. It does not size the trench, set the slope, or include fabric, pipe, or fittings.

How to use this calculator

  1. Choose US customary or metric measurements.
  2. Enter the trench length, width, and depth.
  3. Enter the outside diameter of the drain pipe, or zero to ignore it.
  4. Add a waste allowance and calculate the stone volume.

How the calculation works

A French drain is a trench filled with drainage stone around a perforated pipe. The calculator finds the volume of the trench, subtracts the volume of the pipe laid inside it, and adds the allowance you choose. It reports stone volume only and does not size the trench or set the slope.

Formula

Trench = length × width × depth
Pipe = π × (pipe diameter ÷ 2)² × length
Stone with waste = (trench − pipe) × (1 + waste % ÷ 100)

Worked example

A 50 ft trench that is 12 in wide and 18 in deep holds 75 cubic feet. A 4 in pipe takes up 4.36 cubic feet, leaving 70.64 cubic feet of stone. With 10% waste the planning total is 77.70 cubic feet, or 2.88 cubic yards.

Project considerations

  • Filter fabric, a soil or sand layer on top, and any section with a wider pipe are not included.
  • The pipe must fit inside the trench, so the calculator stops if its diameter is larger than the trench width or depth.
  • Trench size, slope, and outlet design depend on the site and the water to be moved, so follow your plans or a drainage professional.
  • Ordering by volume avoids guessing density. Confirm quantity increments with the supplier.

Frequently asked questions

Should I enter the outside or inside diameter of the pipe?

Use the outside diameter, because that is the space the pipe takes up in the trench.

What if the pipe is wrapped in fabric?

Fabric takes almost no volume, so the result is still a good estimate. Measure the fabric separately if you need to buy it.

References

Published sources for context. They are not used in the calculation.